Installation Manual · REVISION B

SC-410 Installation Manual — Rev B project copy

Fictional / anonymised ENGGEN 720 demonstration source. SiteAssist reads the stored sections below through controlled read-only tools.

Advisory

Document typeInstallation Manual

RevisionB

System version scope4.2 → 4.2

Published04 Nov 2024

Evidence groupATLAS

Source scopeProject History

Original formatPDF

Eligible source. The agent may retrieve this document only when product/version scope and relevance checks also pass.

Stored source sections

3 sections

3.4

Reader bus termination

Source section

Fit one 120 ohm termination resistor at the physical end of each SC-410 reader bus. Do not fit termination at intermediate readers.

5.2

Door output wiring

Source section

Firmware 4.2 supports Normal or Inverted relay output logic. The selected logic must match the installed lock hardware and the approved project wiring schedule.

8.1

Commissioning caution

Source section

A successful credential transaction does not prove the fire-release interface. Fire-release testing is a separate witnessed activity.